Описание

  • Analog output (0...10 V/4...20 mA)
  • Emitted light disengageable
  • Graphical display for easy operation
  • Temperature drift eliminable
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. Using a suitable reflector at the object, a highly accurate position measurement at large distances is also possible.The configurations are selected using a menu and can be protected by a password.
Working Range 0,2...100,2 m
Measuring Range 100 m
Reference Reflector/Reflector Foil 4 ? RQ100BA
Resolution 4...20 mm
Linearity 0,05 %
Switching Hysteresis 13...50 mm
Light Source Laser (red)
Wavelength 660 nm
Service Life (T = +25 °C) 100000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10000 Lux
Beam Divergence < 2 mrad
Light Spot Diameter see Table 1
Reflector required yes
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 100 mA
Switching Frequency 50 Hz
Measuring Rate 1...100 /s
On-/Off-Delay 0...10000 ms
Temperature Drift 0,5 mm/K
Temperature Range -25...60 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 200 mA
Analog Output 0...10 V/4...20 mA
Short Circuit Protection yes
Reverse Polarity and Overload Protection yes
Interface RS-232
Protection Class III
FDA Accession Number 0920382-000
Mechanical Data
Setting Method Menu (OLED)
Housing Material Plastic
Degree of Protection IP68
Connection M12 ? 1, 8-pin
Safety-relevant Data
MTTFd (EN ISO 13849-1) 345,65 a
Output
Error Output yes
Configurable as PNP/NPN/Push-Pull yes
Analog Output yes
RS-232 Interface yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.''