Описание

  • Image processing functions
  • MultiCore technology
The vision sensor weQubeVision is based on the wenglor MultiCore technology. The functions region of interest and tracking ensure optimal object detection. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, filter options, and statistics evaluation.
Lens thread C-Mount
Resolution 736 ? 480 Pixel
Image Chip monochrome
Image chip size 1/3'
Pixel Size 6 ? 6 µm
Service Life (T = +25 °C) 100000 h
Frame Rate 25 Hz
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Response Time 40 ms
Temperature Range -25...55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III
Mechanical Data
Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 ? 1, 12-pin
Type of Connection Ethernet M12 ? 1, 8-pin, X-cod.
Safety-relevant Data
MTTFd (EN ISO 13849-1) 263,03 a
General Data
Web server yes
Function
Presence Check yes
Pixel Comparison yes
Reference Image Comparison yes
Tracking yes
Object detection yes
Dimensional accuracy check yes
Output
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
PROFINET yes
EtherNet/IP™ yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.''